The Magazine of the
Marine Construction Industry

How Bellingham Marine maximized innovation when it built the extension at Waikawa Marina

Appeared in Marine Construction Magazine Issue II, 2024

Reading Time: 2 Minutes

The 251-berth extension at Waikawa Marina in New Zealand’s South Island.

Bellingham Marine New Zealand was contracted in the late part of 2020 to extend the north face of the Waikawa Marina in the stunning Marlborough sounds, providing 251 brand new berths. With 227 piles to be installed with the addition of manufacturing and installation of 401 pontoons, this was an exciting challenge.

The decision was made to pre-pile the marina while the outer fixed breakwater was being built simultaneously, a challenging moment for the team that was exposed to the wave climate and ferry wakes. Instead of the traditional method of piling through the pontoon rings, the team instead used state of the art GPS surveying equipment which enabled the team to accurately able to set out the piling without a breakwater.

According to Dave Lamont, operations manager at Waikawa Marina, “The pre-piling methodology using our own GPS set out equipment has been a great success, resulting in a complete installation of pontoons without any modifications to pile guides or layouts required.”

While piling continued, developed pontoons began to be floated into the waters nearby for assembly. Bellingham’s Unifloat® pontoons were designed with aluminum connections, eliminating all necessary needs for galvanized steel components, while featuring fiberglass rebar internally, removing the metal components fabricated from traditional steel rebar.

The final pontoon was delivered late January 2023 and the official opening held in April 2023. Unifloat pontoons have been a key part of Bellingham Marine’s development. Among the first Unifloat projects was the Port of Seattle’s Shilshole Marina, built in the late 1950’s. The Unifloat docks served Shilshole well right up until their replacement in 2007, and many of the marina’s original docks were sold to nearby facilities.

View over French Pass, Marlborough Sounds. The pass separates the north end of the South Island from the mainland coast.

The company’s product line and services have also grown over the years, from its flagship Unifloat concrete dock system to a portfolio of products and services spanning the entire spectrum of nearshore development.

For more information on the company and its products, visit https://www.bellingham-marine.com. This article previously appeared on the website of the New Zealand Marina Operators Association. For more information on the NZMOA, visit https://www.nzmoa.com.   

Reprinted from Marine Construction Magazine, Issue II, 2024.  

Current Issue

Current Issue of Marine Construction Magazine

Advertisement

Additional Stories

Aarsleff’s Centrum Pile System does double duty on Dutch photovoltaic project

Aarsleff’s Centrum Pile System does double duty on Dutch photovoltaic project

 Aarsleff Ground Engineering Group, has successfully completed the installation of 4,468 precast

Groundbreaking of Liebherr’s Logistics Center for the Americas

Groundbreaking of Liebherr’s Logistics Center for the Americas

Liebherr celebrated a milestone last December with the groundbreaking of its new

Boat Lift Cable Maintenance

Boat Lift Cable Maintenance

Editors Note: The following has been printed courtesy of Pier & Waterfront

ShibataFenderTeam refurbishes berthing  structures at key terminals in Vigo, Spain

ShibataFenderTeam refurbishes berthing  structures at key terminals in Vigo, Spain

Located in north-west Spain, the Port of Vigo is a natural harbor