The Magazine of the
Marine Construction Industry

ShibataFenderTeam Supplies 42 Extruded Fenders for Iceland Port

Appeared in Marine Construction Magazine September, 2025 Issue

Reading Time: 2 Minutes

Wharf at Stykkishólmur, Iceland, lined with tall black extruded rubber fenders below a steep rock cliff.

With a population of nearly 1,200, Stykkishólmur ranks among Iceland’s key settlements and is the largest community on the Snæfellsnes Peninsula in the west.

Celebrated for its well-preserved wooden architecture, the town stands as a vivid reminder of the value of protecting local heritage. It also has a strong maritime identity – its sheltered natural bay hosts a busy port that plays a central role in the region’s fishing economy.

Commissioned by the Icelandic Road and Coastal Administration, ShibataFenderTeam designed and delivered 42 Extruded Fenders (DD 300×300) with an impressive length of 4600 mm, intended for the large wharf that serves the bigger fishing vessels. Each fender features five countersunk drillings (Ø60/30 mm) and two end chamfers of approximately 30°.

The harbor is heavily exposed to strong winds and the shifting weather of the area. To provide reliable and safe vessel contact at all tide levels, our in-house engineering team designed the fenders over 4.5 meters in length. Stykkishólmur is also at the cutting edge of environmental policy and has been a frontrunner in environmental consciousness in Iceland so designing our solutions, good quality was essential to ensure a positive economic footprint in the long term.

Wharf at Stykkishólmur, Iceland, lined with tall black extruded rubber fenders below a steep rock cliff.

This robust solution also presented structural challenges due to the open wood structure over which the DD fenders were installed. While extruded fenders are generally straightforward to install, the limited anchoring of the existing quay required careful planning for proper and seamless integration of the five drillings.

At ShibataFenderTeam, project scale may vary, but our commitment does not. Whether for large terminals or local ports, each assignment calls for the same adaptability, engineering precision, and attention to detail – standards that shape everything we do.

Current Issue

Current Issue of Marine Construction Magazine

Advertisement

Additional Stories

Sheet Pile Breaks Loose from Chain; One Dead

Sheet Pile Breaks Loose from Chain; One Dead

Employee #1 and Employee #2, both pile drivers, were working in a

SOME “SIMPLE” SAFETY GUIDELINES

SOME “SIMPLE” SAFETY GUIDELINES

Safety is so important to us here at Marine Construction Magazine. That

Two Link-Belt TCC-2500s provide solution to South Carolina bridge project

Two Link-Belt TCC-2500s provide solution to South Carolina bridge project

The Lane Construction Corporation is utilizing two Link-Belt 250-ton TCC-2500 telescopic crawler

When To Replace a Boat Lift Cable

When To Replace a Boat Lift Cable

The proper time to replace a boat lift cable depends on a